Cement Renders (Polymer Modified)
MR60 Masonry Render
MR60 Masonry Render is a polymer modified cement based render suitable for use over masonry surfaces with 60 minute working time.
MR120 Masonry Render
MR120 Masonry Render is a polymer modified cement based render suitable for use over masonry surfaces with 120 minute working time.
MR Masonry Render Coarse
MR Masonry Render is a polymer modified cement render generally used where a coarse grain of finish is required to assist in disguising substrate irregularities.
EP Render is a pre-bonded, polymer modified cement render particularly suitable for polystyrene building systems.
Set & Prep
Set & Prep is a multipurpose polymer modified cement based building adhesive for the installation of RSA approved render beads and trims, as a key coat for low suction substrates, and as a jointing compound over F.C. Sheeting in conjunction with RSA Flexirender and/or acrylic textures at a minimum thickness of 2mm.
Acrylic Textures – Trowel On
Bling Coarse (LB, MB, UDB)
Bling Coarse is an acrylic based high quality finish that does not require over-coating with paint. Bling Coarse contains the addition of a quartz stone that enhances the finished look and gives it a sparkle when exposed to light. Bling Coarse is suitable for tinting and available in three bases depending on the colour required.
Polysand Fine (LB)
Polysand Fine is an acrylic based, sand enhanced product designed for use over RSA rendered substrates including fibre cement sheeting. Polysand Fine is suitable for tinting and only available in a light base.
Polysand 800 (LB, MB, UDB)
Polysand 800 is an acrylic based, stone enhanced product designed for use over RSA rendered substrates including fibre cement sheeting. Polysand 800 is suitable for tinting and available in three bases depending on the colour chosen.
Trowel On 2mm
Trowel On 2mm is an acrylic based, stone enhanced product which provides a vertical travertine or random swirl scratch coat.
Flexirender is a unique high quality acrylic based sand enhanced product particularly suitable for F.C. Sheeting, previously painted surfaces and other correctly prepared surfaces. Flexirender is a high build flexible render that can be used as both a base coat and a finishing coat.
Patch Smooth is designed to fill defects in concrete & masonry surfaces & is primarily used as a ‘filler’ prior to the application of protective coating systems. Patch Smooth is highly sand-able and is an excellent smooth uniform foundation for sealer and protective coatings.
Patch Coarse is an alternative patching compound for F.C. Sheeting joints where the subsequent acrylic coating will achieve less than 2mm thickness. The product can be used to patch minor irregularities in concrete surfaces. Patch Coarse is not sand-able.
Render Bond is commonly used to prime porous bricks, blocks & AAC Hebel (essential) prior to the application of render coats. Can be added to render mixes for greater adhesive strength where required.
QT Lite Base
QT Lite Base is a flexible, high build levelling coat requiring no floating and is recommended for Autoclaved Aerated Concrete panels (AAC) and suitable for a range of other substrates including FC Sheeting (Blue Board), AFS and Ritek.
Multi Prime (WB, UDB)
Multi Prime is a multipurpose water borne acrylic based primer with high alkali resistance & anti-efflorescent properties. Multi Prime is grit enhanced to provide a better key and adhesion to relevant surfaces and RSA acrylic Textures and Coatings. Multi Prime is suitable for tinting and available in two bases depending on the colour chosen. It is a key component to RSA Bling Systems.
Cleanskin is a water based, clear acrylic coating which provides a durable finish over RSA Bling texture coatings for ease of cleaning and maintenance and assists in evening the appearance of the surface where required.
Rapid Shield Matt (LB, MB, UDB)
Rapid Shield Matt is a high performance, 100% pure acrylic, exterior protective coating suitable for over coating both RSA Masonry Renders and Acrylic Textures. It helps to mask irregularities in the finished textures, and has the added benefit of ‘self-priming’ to greatly improve application efficiencies. Rapid Shield Matt is suitable for tinting and available in three bases depending on the colour chosen.
Patch Smooth is is recommended for interior wall and ceiling surfaces, and over properly prepared monolithic concrete and cement rendered surfaces.
IMPORTANT COLOUR INFORMATION
When choosing a protective coating for application over any EPS substrate, the colour section must achieve a Light Reflectance Value (LRV) of greater than or equal to 40%.
RSA is not liable for product or substrate failure where the LRV of the tinted texture protective coating is under 40%.